ایمپلنت دندان به عنوان یکی از بهترین روشهای جایگزینی دندان از دست رفته شناخته میشود. Implants are a popular method for replacing lost teeth due to their similarity in appearance and function to real teeth, and today they are implemented in two forms: digital and conventional. Many people may be wondering which of the dental implant methods is more suitable for them and what is the difference between a digital implant and a conventional implant. In the rest of this article, we will mention the difference between digital implant and normal implant and their characteristics.
The study found that the fully digital workflow resulted in better interproximal and occlusal contact accuracy, shorter impression times, and higher patient satisfaction compared to conventional techniques.
"A randomized clinical trial published in the journal Materials compared three different methods of performing dental implants: fully digital, hybrid digital and fully traditional (analog).
The results showed that The use of the fully digital method results in more precision in interdental contact and occlusal contact (the surface where the teeth meet), reducing molding time, and greater patient satisfaction.»Source: MDPI
What is a regular dental implant?
Typical dental implant is actually the same traditional method of replacing missing teeth. In this method, after the gum surgery, a titanium screw is placed in the jawbone so that after a few months the crown of the artificial tooth can be attached to it.
A normal dental implant is a process of several months until the titanium screw is well welded in the jawbone and finally the crown is installed on the implant.
What kind of people is a traditional implant suitable for?
It may be a question for many people, in what conditions is the traditional implant suitable for people. Traditional implants are used for people in the following conditions:
- Patients with bone loss who need bone grafting; Because in a normal or traditional implant, there is a possibility of bone grafting as part of the treatment process.
- People who want to spend less on their implants Because the traditional implant has a lower price than the digital implant.
- People with complex dental problems who may need special techniques in the treatment process.
- People who do not have access to advanced digital implant facilities in their place of residence.
What is a digital implant?
Digital implant may also be known as "non-surgical implant". In this method, advanced technologies such as implant design software, 3D scanners, and 3D printers are used to make the treatment process more accurate.
Since this method is highly accurate, it can reduce unwanted problems during treatment.
What kind of people is digital implant suitable for?
This method is generally suitable for people who are looking for a method with shorter treatment duration, more accuracy and fewer side effects. In the following situations, digital implants are considered a suitable option:
- People who have sufficient bone density in the desired area and will not need a bone graft.
- Patients for whom the accuracy and high quality of treatment are very important.
- Those who want to receive the implant in a short period of time. Because in this method, the amount of damage to soft tissue and bone is much less.
- Patients are interested in a less invasive method because in the digital implant, the gum incision is smaller and as a result bleeding and pain after surgery is less. They use tobacco and alcohol for a long time.
What is the difference between a digital implant and a normal implant?
Now that you are familiar with the concept of digital implant and normal implant, we should discuss the difference between these two implants. Among the differences between digital implants and conventional implants are the following:
Difference between digital implants and conventional implants in the implementation stages
One of the most important differences between digital implants and conventional implants is related to the implementation stages of these two methods. In the traditional implant method, the condition of the teeth and jaw bone is first checked for implant placement, and if necessary, the root of the previous tooth or the current damaged tooth is removed from the gum.
After recovery, if necessary, bone grafting is done, and then the implant is placed inside the jawbone through base surgery. After bone grafting and the base of the implant, molding is done and the abutment is installed on the implant. Finally, it takes a few months for the implant base to be fully connected to the jaw bone and finally the tooth crown is placed on it. In digital implant, after the initial consultation and digital imaging of the jaw and teeth, the 3D design of the tooth guide template is done. Then, the base of the implant is planted inside the jawbone with a gum punch. digital molding of the tooth and making the implant cover is the next step.
Then the implant abutment is installed and finally the tooth cover is placed on the abutment.
The difference between digital implant and conventional implant in treatment cost
The cost of digital implant treatment is higher than traditional implant. In this method, specialized and digital tools are used, which have a high value and their cost is considered due to the need for repair and service.
This point makes people look for the traditional implant method in search of more suitable costs.
The difference between digital implant and normal implant in the recovery period
One of the other differences between digital implant and normal implant is the length of the recovery period after treatment. The recovery period after a normal implant lasts from a few weeks to a few months. In digital implants, due to the reduction of medical errors, the treatment is performed with the least amount of invasion and bleeding, and this problem results in a shorter recovery period. The difference between digital implants and conventional implants during the treatment period. The need for this method is to go through different stages.
In the digital method, due to the use of technologies, the treatment period progresses faster and more accurately, and as a result, it becomes shorter. The time required for implant placement is also different in these two methods.
In the normal method of implant implantation, it can last between 45 minutes and two hours, while in the case of digital implant, it is done in 30 minutes. In a normal implant, a deep longitudinal cut is made in the empty space of the tooth, which causes a lot of bleeding and more rest. In the digital implant method, the exact location of the implant base is determined in the bone, and there is no need to split the gum to find the jawbone drilling site. It is possible that there is no need to suture the gums after implant placement. In the conventional implant method, sutures are required due to the cutting of the gum.
Difference between digital implant and conventional implant in human errors
One of the most important differences between digital implant and conventional implant is the level of accuracy and reduction of human errors. In digital implant, 3D software and computer technologies are used, and this issue greatly reduces human errors.
In this implant, the location of the implant and the location of the nerves and roots of the adjacent teeth are examined and determined with the help of an intraoral scanner. Also, the shape of the teeth after the implant can be designed in advance, and in this way, many human errors are reduced.
The difference between digital implant and conventional implant in safety
These two methods are also different from each other in terms of safety. Due to the use of computer equipment in digital implant implantation, the accuracy of the treatment is much higher and therefore the nerve fibers or the roots of the adjacent teeth are not damaged. The digital method has higher safety compared to the conventional implant method.
The difference between the digital implant and the conventional implant in the amount of pain and bleeding
The conventional implant causes more pain and bleeding due to the cutting of the gum. In digital implant, the punching method is used instead of cutting, and due to the high accuracy of this method, pain and bleeding are greatly reduced.
The difference between digital implant and conventional implant is in the use of computer technologies
As mentioned, special technologies are used in the digital implant method; if there is no such equipment in the normal implant.
Among the technologies used in the digital implant are the following:
- Intraoral scanner
- 3D imaging of the jaw
- CAD/CAM technology
- Surgical navigation system to determine the exact location of the implant base
- Surgical guide
Difference between digital implant and normal implant In the need for traditional molding
In a normal implant, it is necessary to mold the teeth to plant the implant cover, which can be uncomfortable for many patients.
During digital implant implantation, teeth are molded using intraoral scanners, and there is no need for molding paste, which makes patients feel better.
The difference between digital implants and conventional implants is in the number of times required to visit the dentist. A dentist is needed.
Due to the use of technology, many steps are performed in one session in the digital implant method, and this reduces the number of times you need to visit the dentist.The difference between digital implants and conventional implants in treatment satisfaction
The other difference between digital implants and conventional implants is the level of satisfaction of people after implant placement. People who have had digital implants have expressed more satisfaction than people who have had conventional implants.
The reason for this satisfaction is the reduction of pain and bleeding, the reduction of the recovery period, the reduction of human errors and the number of treatment sessions.
Digital implant in the office of Dr. Farin Shamshirgar, dental implant specialist in Zafaranieh
Digital implants require digital technology and equipment, and for this reason, they are performed by special dentists. It is very important to go to a specialist dentist for treatment, who perform digital implants with the latest specialized equipment.
One of the most prominent dentists in this field is called Dr. Farin Shamshirgar. They are dental implant specialist in Zaferanieh and they can do this in their office with the best devices. To use the expertise of Dr. Farin Shamshirgar in the field of digital implants, you can visit his office in Zafaranieh.
Final word
People who need dental implants may have heard about digital implants and conventional implants. These two methods are both used to replace missing teeth, but they differ from each other.
In the digital method, advanced technologies are used to perform the implant with less complications and with more precision. بسیار مهم است افراد از تفاوتهای این دو روش آگاه باشند تا بتوانند بهترین روش را با توجه به وضعیت دندانهای خود انتخاب کنند.
مشاوره رایگان!
برای مشاوره رایگان یا بصورت آنلاین ثبت نوبت کنید یا با ما تماس بگیرید.
ایمپلنت دیجیتال با استفاده از اسکنر و طراحی کامپیوتری انجام میشود، در حالی که ایمپلنت معمولی با روشهای دستی و قالبگیری سنتی انجام میگردد.
بله، ایمپلنت دیجیتال معمولاً دقت بیشتری در جایگذاری، طراحی تاج و تطابق با لثه دارد.
ایمپلنت دیجیتال معمولاً زمان درمان کوتاهتری دارد، چون نیازی به قالبگیری سنتی و مراجعات زیاد نیست.
در بسیاری از موارد بله، اما بسته به تجهیزات کلینیک و شرایط بیمار ممکن است تفاوت هزینه زیاد نباشد.
ایمپلنت دیجیتال راحتتر است چون بدون قالبگیری سنتی انجام میشود و اغلب نیاز به جراحی باز ندارد.
بله، دقت بالاتر در جایگذاری میتواند به بهبود تطابق و در نتیجه افزایش طول عمر ایمپلنت کمک کند.
