Educational article

tooth scraper for laminate; How much and why is it done?

Category: tutorial No Opinion on tooth sharpener for laminate; How much and why is it done? Published on November 8, 1404 Last update: November 25, 1404 Dental laminate should be placed on the teeth naturally and beautifully. This work is done with the aim of correcting the smile design, increasing the durability of the laminate and preventing unnatural thickening of the teeth.

What is a tooth scraper for laminate?

Tooth scraping for laminate means removing a very thin layer of tooth enamel (about 0.3 to 0.8 mm) to create enough space for placing ceramic or composite laminate. This will make the laminate fit naturally on the teeth and make the appearance of the smile more beautiful.

In what cases is tooth scraping more common for laminate?

Tooth scraping for laminate is more when the teeth are disorganized, strongly discolored, there is a need to correct the overall form, or thicker ceramic laminates are used.

Disordered or protruding teeth

If the teeth are significantly misaligned or some teeth are pushed further than others, the dentist will have to do more grinding on the teeth to create an even surface.

This makes the laminates to be harmoniously placed on the row of teeth.
Otherwise, laminates look thick and unnatural.

Presence of deep stains or severe discoloration

In cases where teeth are severely discolored due to fluorosis, drug use (such as tetracycline) or old decay. To completely cover these spots, a thicker laminate is needed.

As a result, the tooth grinding for the laminate will be more to create enough space for the placement of the laminate.

Correcting the overall shape of the teeth

If the teeth are too big, too small, or have extensive fractures and chippings, the dentist should create a suitable form for installing the laminate with more grinding.

This work is especially important in the front teeth, which play the main role in the beauty of the smile.

In what cases is tooth scraping less for laminate?

One of the main concerns of laminate applicants is the amount of tooth grinding for laminate. Fortunately, in many cases, this trim can be very low or even close to zero. In the following, we examine the conditions in which the need for tooth enamel grinding is minimized:

Relatively tidy and healthy teeth

If the teeth are in good shape and alignment, the dentist only removes a very thin layer of tooth enamel to create a proper surface.

In this case, the grinding is more to create a better adhesion of the laminate, not to change the shape of the tooth.
This group of patients is usually the best candidate for minimally invasive laminates.

Using ultra-thin laminates (luminaries)

Luminaires or ultra-thin laminates are very thin (about 0.2 to 0.3 mm).

Due to the thinness of this type of laminate, the need to sharpen teeth for laminate is minimized.
In many cases, it is possible to install luminaires even without cutting.
This method is an ideal option for people who do not want their tooth enamel manipulated.

Patients who only need color change

If the main problem of the patient is the change in the color of the teeth and the teeth have no problem in terms of shape and alignment:

There will be very little tooth scraping for laminate.
In this situation, the laminate has more of a covering and beauty role than a shape modifier.
In some cases, you can even use uncut laminates.

tooth chip for laminate; Is it dangerous?

Many patients worry that tooth chips for laminitis will cause serious damage to the teeth. But you should know that if this work is done by an expert dentist with standard tools, it will not harm the main structure of the tooth. Only the surface layer of tooth enamel is shaved and the dentin remains intact.

Advantages and disadvantages of tooth grinding for laminate

Advantages

Beauty and brightness of smile
Fix minor inconsistencies
Increasing self-confidence
High durability (10 to 15 years)

Disadvantages

Irreversibility of tooth enamel shaving
Possibility of temporary sensitivity to cold and heat
need to take more care of teeth

Comparison table of cutting amount in laminate types

laminate type The amount of tooth grinding Durability Approximate cost (1404) Ceramic laminate 0.5 to 0.8 mm 10 to 15 years 6 to 10 million tomans for each tooth Composite laminate 0.3 to 0.5 mm 5 to 7 years 3 to 5 million tomans for each tooth Lumineers (without cutting) 0 to 0.2 mm 10 years and above 8 to 12 million tomans for each tooth

Daily price of tooth grinding for laminate

The price of laminate and the costs related to tooth shaving for laminate vary depending on the type of laminate, the specialty of the dentist and the geographical location. In 1403, the cost of ceramic laminate varies between 6 to 10 million Tomans and composite laminate between 3 to 5 million Tomans for each tooth.

Does sharpening teeth hurt for laminate?

No. This is usually done under local anesthesia and the patient does not feel any pain. After the procedure, there may be some temporary sensitivity, which is normal and will disappear over time.

Laminate without trimming:

In some cases, ultra-thin laminates or luminaries can be used that require very little or even no trimming. This method is an ideal option for patients who have healthy and neat teeth.

Frequently asked questions about tooth grinding for laminate

Is tooth grinding permanent for laminate?

Yes. After sharpening, tooth enamel cannot be restored and should always be covered with a laminate or veneer.

Does everyone need to grind their teeth for laminate?

No. In some special cases, uncut laminates can be used.

How many times is tooth scraping done for laminate?

This is done only once at the beginning of the treatment and does not need to be repeated after that.

Why is tooth grinding done for laminate?

Creating a smooth and uniform surface for gluing the laminate
Preventing excessive thickening of teeth after installing laminate
Correction of minor irregularities and severe discoloration of teeth
increasing durability and strength of laminate

What is the amount of tooth grinding for laminate?

According to experts, the amount of tooth shaving for laminate is usually between 0.3 to 0.8 mm. This amount is very small and only the surface layer of tooth enamel is removed.

Final word

Tooth scraping for laminate is a surface and safe process to create a suitable surface and increase durability Laminate is done. The amount of sharpening and the choice of the type of laminate should be determined with the opinion of a specialist dentist and based on the conditions of each patient.

Share Write your opinion Cancel Answer Read more

Dental laminate color catalog; The difference in colors and its effect on your smile
Choosing the laminate color from the dental laminate color catalog is one of the most important steps in smile design. The dental laminate color catalog helps patients to choose a color that suits their face and taste with full knowledge and have a natural or brighter smile. What is the dental laminate color catalog? Dental laminate color catalog is a collection of [...]
Dental implant price in Sanandaj | Dr. Sajjad Zafari
The price of dental implants in Sanandaj depends on the number of teeth required for surgery. Dental implant is an advanced and permanent method to replace lost teeth. In this method, a metal base made of titanium is surgically placed in the jaw bone, and after welding with the bone, a dental crown is installed [...]
Care after dental laminate | A complete guide to having an attractive smile
Observing care after dental laminates will help you protect your laminates in the best way and enjoy a bright and long-lasting smile. Give yourself a beautiful smile! Smile is one of the most effective elements of human communication; A sign of self-confidence, peace and inner beauty. But sometimes [...]
Dental laminate price in Sanandaj
Dental laminate is a thin coating (usually made of ceramic) that is glued on the front surface of the teeth to make them look more beautiful. What is dental laminate? Dental ceramic laminate is a therapeutic method to correct the smile design [...]