**The difference between dental laminate and dental composite** is in the materials, the method of implementation, durability, cost and their use; Laminate is made of porcelain ceramic, which requires tooth enamel shaving and laboratory fabrication, has a high durability of up to 10-15 years, and is used for permanent corrections, but it costs more and is difficult to repair. On the other hand, the composite is made of tooth-colored resin, it is performed without grinding or with low grinding on the tooth in one session, it lasts less than 5-7 years, it costs less and it is easier to restore, it is more suitable for minor and temporary corrections. Laminates are easier to care for and more stain resistant, while composites require more maintenance and repair. The choice between these two methods should be made in consultation with the dentist depending on the needs, budget and dental conditions of each person. What is the difference between laminate and composite? **Dental laminate** is one of the most popular ways to improve the smile design. Laminate is a type of dental coating that is made of thin porcelain ceramic and is placed on the teeth; But it is permanently attached, and to install it on a part of the tooth enamel, it is practically impossible to shave and remove it, and it can only be replaced. **Dental composite** is a resin coating that is the same color as natural teeth and is installed on the teeth in one session and is completely reversible. But only a dentist can install or remove it, of course you should know that its lifespan and durability is less than laminate and its resistance is also less. **Differences in materials and structure of laminate and composite** The material of the laminate is ceramic or porcelain (a type of advanced ceramic that is made of fine-grained clay, feldspar, silica and other minerals), which is of very high quality and must be made in a laboratory. Laminate is very similar to teeth and its color is more transparent and white. A composite is made of resin (resins are polymeric or pseudo-polish materials that can be natural (such as tree resin) or synthetic (polymers made in the chemical industry)) that can be installed on the tooth by a dentist in one session. Of course, the transparency of composites is less than laminates and their resistance and durability are also less. **The difference between the implementation process and the treatment time of laminate and composite** Laminate requires shaving off a small amount of enamel, molding, and fabrication in a lab. The treatment takes approximately 2 to 3 weeks. Composite is performed in short sessions (about 1 hour) in the office, without the need for molding or fabrication in the laboratory, and does not require tooth filing for composite. **The difference between the life span, durability and durability of laminate and composite** If you follow the recommendations and care, you can use laminate for 10 to 15 years even more. But composite has a lifespan of between 5 and 8 years, and over time it is possible to change its color, even if care is taken. **The difference between laminate and composite costs** Laminate is almost 3 times more expensive than composite due to more expensive materials, the need to manufacture in a laboratory and higher expertise. Composite is more economical and cheaper, because its materials are cheaper and the implementation process is simpler. **The difference between the amount of tooth grinding in laminate and composite** To install the laminate, the dentist must cut a part of the tooth enamel by 1 to 3 mm. But for composite, no cutting is required and it can be easily installed on most teeth. **Differences and differences in laminate and composite restoration and repair** Practically, laminates cannot be repaired and restored, and in case of breakage, chipping or cracking, they must be replaced with a new laminate. But this is not the case with composite, and the dentist can easily repair and restore them and reattach them to the teeth. **Differences and differences in applications and uses of laminate and composite** Laminates are mostly used to correct severe discoloration, large breaks, or deformities and permanent corrections. Composites are often used to quickly and temporarily correct minor discolorations, filling gaps, and small tooth imperfections. **The difference between laminate and composite care and maintenance** Laminates require regular dental care (brushing, flossing) and avoiding excessive pressure. It is also better to avoid consuming a lot of colored food. Due to the type of structure, composites are more prone to discoloration and scratching, so you should be more careful. You must go to the dentist regularly for check-ups and if necessary, do dental composite polishing. **The difference between the beauty and the natural appearance of dental laminate and composite** Usually, the surface of the laminate is very smooth and shiny and looks very similar to natural teeth and is very transparent and white. But composite is less transparent and its thickness and glossiness are less than laminate and its color is slightly different. **Laminate or composite, which is better?** > **In short, laminate is better suited for more beautiful, durable, and permanent fixes, but composite is the more cost-effective, faster, and more repairable option. It is recommended to consult a dentist before making a decision so that the best option is suggested according to the condition of your teeth and your goals.**